Care

Do not use moisturizers, perfumes, powders or body oils on your breasts prior to wearing NuBra as this will reduce the effectiveness of the adhesive.

CLEAN YOUR SKIN

THIS IS THE MOST IMPORTANT STEP.
Clean your breasts with mild soap (free of moisturizers) to remove body oil and skin residue. Dry your skin with a soft towel.

START WITH ONE CUP

Stand in front of the mirror. Holding the cup with both hands, turn the upper bra cup outward and apply to your breast. (See photo).

Care step2 figure1

Position the cup to the desired height and angle on your breast and apply pressure along the cup edge.

Repeat the same on your other breast making sure both cups are positioned at the same angle and height. (See SUGGESTIONS)

Secure the hold by pressing firmly with both hands on the bra cups. (See photo)

Care step2 figure2

CONNECT THE FRONT CLOSURE

Now you are ready to enjoy the total freedom and comfort of your NuBra.

*NuBra is completely strapless and can only provide a certain degree of lift.

REMOVE YOUR NUBRA

Start by detaching the front clip. Gently peel back the bra cup starting from the top edge and slowly remove from your breast. Repeat the same process on your other breast.

*We recommend cleaning your NuBra immediately after use.

NuBra is designed to be thinner on the bottom so it can mould seamlessly with your breasts. When applying NuBra position the bra cup higher on your breast (it is normal if NuBra does not cover your entire breast).

Care suggestion figure1
Care suggestion figure2

For more lift and support angle the bra cups so the center clips point downward. Once the front closure is connected, the results are instant.
For a fuller look position the bra cups further apart. This will maximize your cleavage.

Always wash your NuBra after each wear to remove any body oil and skin residue that may clog the surface of the adhesive.

DO NOT MACHINE WASH

While holding one bra cup in the palm of your hand, turn the cup inside out and wet the adhesive surface with warm water. Add a small amount of mild liquid soap (free of moisturizers) or use our NUBRA CLEANSER. Our cleanser is specifically designed to prolong the life of your NuBra without damaging the adhesive. View Cleanser

Gently use the palm of your other hand to wash the adhesive. Do not use your fingernails as this can damage the adhesive. Rinse the bra cup with warm water to remove the soap residue. Carefully shake off excess water.

DO NOT MACHINE DRY

Your NuBra packaging includes a cradle that protects the bra cups. We recommend placing the bra cups in their cradle. The cups should be placed with the adhesive facing up and the cradle left open. Allow to dry in an area free of damaging dust particles to dry.

DO NOT USE A TOWEL OR BLOW DRYER.

When your NuBra is completely dry, close the cradle to store. This will prevent dust and lint from coming in contact with the adhesive.

Do not allow the adhesive to come into contact with fabric. Lint will clog the adhesive. If lint does come into contact with the adhesive, carefully remove with your fingers.

Do not use a brush or your fingernails to clean the adhesive. Abrasive and sharp objects will cause permanent damage.

Do not clean the bra cups with harsh cleaning solutions. All you need is warm water and mild liquid soap (free of moisturizers).

Do not use on open cuts, skin disorders, sun damaged or sun burned skin.

Do not wear if you have skin depigmentation problems, or have a family history of skin depigmentation. All skin types are different; discontinue use if signs of irritation or rash appear. If irritation continues, please consult your doctor.

We do not recommend wearing NuBra for more than six consecutive hours.

NUBRA IS NOT RECOMMENDED FOR WOMEN WITH SENSITIVE SKIN